REXROTH DR10-2-5X/100Y Valves

Cor - Static Load Rating:594395 lbf; Dimension P:1.6 in; Dimension L:11.7 in; Bearing Type:Split Cylindrical Ex; Dimension H:6.4 in; Seal Type:Felt Seal; Dimension R:27.9 in; Dimension V:0.2 in; Shaft Size:11.5 in; Maximum Speed:610 rpm;

Bore Size d:70 mm; Radius Rs min:1.100 mm; Clearance:C3; Cr - Dynamic Load Rating:38.6 kN; Outside Diameter D:110.000 mm; Weight:0.57 Kg; Grease Reference Speed:6400 rpm; Outside Ring Width B:20.000 mm; C0r - Static Load Rating:30.4 kN; Oil Reference Speed:9300 rpm;

Specifications:Open End One-sided S; Rolling Element Material:Steel; Days to Ship:Quote; B:18; RoHS:6; Rolling Element Material:Steel; Raceway Ring Shape:Needle Roller; Revolution Frequency(rpm):7500; Inner/Outer Ring Material:Steel; Outer ring oil hole:No;

Note:This product line wa; Shaft Size:7.25 in; Dimension J:25.0 in; Shipping Weight:1494 lb; Series Type:Heavy Series; Ca - Axial Load Rating:22391 lbf; Cr - Dynamic Load Rating:359020 lbf; Bearing - Housing - Seal:HSE704BRHHTPS; Dimension M:10.5 in; Dimension K:6.8 in;

Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Stroke:No; Grease Type:SH44M; Bearing Unit, Type:Take-Up Type; Days to Ship:8 Days; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Bearing Inner Dia. Shape:Cylindrical Bore

D:52; Features:Heat resistant / Ant; Size Standards:Metric System; Width(mm):7; The material of a ball:440C Stainless Steel; Holder Material:304 Stainless Steel; Number of Raceway Ring Rows:Single Row; d:40; Holder Material:304 Stainless Steel; Number of Raceway Ring Rows:Single Row;

T max.:100 °C; e:16 mm; J:70 mm; A2:35.8 mm; S:14.3 mm; s1:17.05 mm; Designation of housing:SF205-; Designation of bearing:SUC205; C0:8 kN; d:25 mm;

Days to Ship:Quote; Machining:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Dynamic Rating(N):29100; Grease Type:Standard Grease; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Square flange shape; Unit Body Material:Cast Iron; Fit:J7; Surface Treatment:No;

Y2 - ISO Factor6:2.17; Design Unit:METRIC; B - Inner Ring Width:190 mm; Bearing Weight:210.300 Kg; da - Inner Ring Backing Diameter:395.000 mm; Cage Type:EMB; r - Outer Ring To Clear Radius2:4.000 mm; C0 - Static Radial Rating:6850000 N; C1(2) - Dynamic Radial Rating (Two-Rows):4500000 N; e - ISO Fa

Z:48.7 mm; J:130 mm; L:90 mm; A:34 mm; Dz:80 mm; C0:15.2 kN; T max.:100 °C; Recommended tightening torque for set screw:8 Nm; Designation of closed end cover:SCC207; H:161 mm;

C0:11.2 kN; Designation of closed end cover:SCC206; Dz:70 mm; Weight:1.99 kg; H2:41 mm; C:19.5 kN; Designation of housing:SP206-207/62N-; B:38.1 mm; L1:225 mm; s1:19.05 mm;

G1:M16; Designation of housing:EHE204-; L3:38 mm; SW:3 mm; C0:6.65 kN; A:25 mm; Recommended tightening torque for set screw:5.5 Nm; T min.:-20 °C; d1:32.4 mm; B1:43.5 mm;

Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Type:Bearings with Housin; Bearing Retained:No; Bearing I.D. d(mm):12; RoHS:6; Bearing Part Number:6901; Width T(mm):25 ～ 40;

Da max:78.7 mm; Y0:2.58; k:2.5 mm; Dynamic load, C:121 kN; Radial clearance class:C4; Static load, C0:113 kN; d2:52.4 mm; ra max:1 mm; Nlim:2,100 rpm; B:28 mm;

Bearing Material:[Steel] Steel; Flange O.D. H(φ):47; Type:Bearings with Housin; Shape:Flange Type; Seals:DD (Contact Rubber S; Housing Material:1045 Carbon Steel; Bearing Part Number:6802; Number of Bearings:Double; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea;