FAG 16048-MA-C3 Single Row Ball Bearings

r min.:5 mm; B:140 mm; Da min:697 mm; Bore Diameter (mm):560; Basic dynamic load rating (C):3100 kN; d:560 mm; (Grease) Lubrication Speed:340 r/min; (Oil) Lubrication Speed:430 r/min; da min.:582 mm; Calculation factor (Y0):4;

db - Cone Backface Backing Diameter:20.31 in; Series:480000; Cage Type:Pin-Type; da - Cone Frontface Backing Diameter:20.31 in; R - Cone Frontface To Clear Radius2:0.250 in; G2 - Heat Generation Factor (Rib-Roller End):343; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:361000 lbf; C

Limiting speed:2600 r/min; Ca min.:8 mm; da max:194 mm; ra max.:2 mm; Da min.:225 mm; Da min:225 mm; Calculation factor e:0.48; Basic static load rating (C0):1460 kN; Calculation factor (Y1):1,4; D:250 mm;

Weight / Kilogram:0.011; Product Group:B04144; Inventory:0.0; Outside Diameter:0.438 Inch | 11.125; C:0,437 inch; Category:Needle Non Thrust Ro; D:11,112 mm; m:4 g / Weight; C:11,112 mm; Closed End:Yes;

Thread (G):M6x1; N2:70 mm; L5:32 mm; A5:39.7 mm; H1:111 mm; T max.:100 °C; L4:121 mm; B:65.1 mm; s1:32.55 mm; Basic dynamic load rating (C):57,2 kN;

B:14 mm; Brand:Fersa; Bore Diameter (mm):17; Size (mm):17x47x14; Width (mm):14; Outer Diameter (mm):47; Bearing number:6303-2RS; d:17 mm; D:47 mm;

Bore Diameter (mm):35; Bolt (G):M12; Bearing number:UCTL207+WL200; H2:176 mm; L3:200 mm; S:17,5 mm; L2:150 mm; Brand:NACHI; Width (mm):42,9; J:500 mm;

Basic static load rating (C0):190 kN; das rec.:86,5 mm; Bore Diameter (mm):75; Limiting speed:3200 r/min; Reference speed:2600 r/min; d1:89 mm; Db max:110 mm; r1 min.:1,1 mm; Fatigue load limit (Pu):24,5; C:30 mm;

da:141 mm; r:3,3 mm; Aa:2,9 mm; D:184,15 mm; Basic dynamic load rating (C1):145 kN; Factor (G2):83,6; R:3,3 mm; Factor (Cg):0,0491; Brand:Timken; Size (mm):133.35x184.15x25.4;

Oil Reference Speed:6300 rpm; Outside Diameter D:190.000 mm; Outside Ring Width B:36.000 mm; Weight:3.710 Kg; Clearance:C3; Cr - Dynamic Load Rating:133 kN; C0r - Static Load Rating:105 kN; Grease Reference Speed:4400 rpm; Bore Size d:105 mm; Radius Rs min:2.100 mm;

Bore Diameter (mm):45; Bearing Bore after Mounting (di) - 45 +0.062 / -0:45 +0.062 / 0; Shaft Size (ds) - 45 -0.080 / -0.105:45 0.080 / 0.105; Bearing Length, Nominal (B):40.000; Bearing Outside Diameter, Nominal(Do):50.000; Shaft Dia., Nominal (d):45.0000; Wall Thickness (S3):2.500; Bearing Type:st

Width (mm):22,225; (Grease) Lubrication Speed:5300 r/min; Size (mm):34.925x73.025x22.225; Bore Diameter (mm):34,925; Bearing number:02877/02820; D:73,025 mm; Basic static load rating (C0):74,9 kN; Weight:0,41 Kg; T:22,225 mm; C:17,462 mm;

Outer Diameter (mm):118; (Grease) Lubrication Speed:8 800 r/min; Size (mm):85x118x22; Basic dynamic load rating (C):65 kN; Basic static load rating (C0):86 kN; D:130 mm; Bore Diameter (mm):85; d:85 mm; Bearing number:N1017RSTP; Weight:0,943 Kg;

Bearing number:GB12136; D:66 mm; Brand:SNR; d:35 mm; Size (mm):35x66x37; C:37 mm; Bore Diameter (mm):35; Width (mm):37; Outer Diameter (mm):66; B:37 mm;

db(min):111; Da(max):224; d1:-; (Grease) Lubrication Speed:2600 r/min; Fw:133.5 mm; Basic dynamic load rating (C):410 kN; da(min):-; Oil lub.:3400; C0r:444; r(min):4;